Warning: Creating default object from empty value in /home/content/28/8456028/html/blog/wp-content/themes/precisio-pro-custom/functions/admin-hooks.php on line 160
Tag Archives | clippers

Barber School Success Part 3 – Keep Your Barber Textbook With You At All Times

The tip for this blog is always have your barber textbook with you. Your textbook comes in your barber school kit for a reason. All the information you need to know for the real world and each school day is in there. You can’t learn from your barber textbook if you don’t have it with you.

I can’t tell you how many times I’m at a barber school or a cosmetology school and students are fumbling around to borrow a barber or cosmetology textbook from a fellow student with the barber instructor asking “Why don’t you have your textbook?” If you bring it home put it in your car or in your backpack so you are done using it.

Another thing I learned early on is to never let anybody borrow my barber books. It never fails. You think you are helping out until the next day your fellow student is either out sick or forgets to bring your book back to school. This will make you look unprepared and unorganized.

Check out the rest of the site for more info on how to be successful in barber school.

 

 

0 Comments

How To Cut Men’s Hair

http://www.firstchair.com/features/advice-for-new-stylists/hair-cut-color-tips/Male-Enhancement-142929375.html

I would like to take this opportunity to thank Modern Salon and First Chair magazine for asking me to write an article for them explaining the most important things you need to know when starting a career in men’s haircutting.

The above link is to the article in First Chair Magazine which is distributed to cosmetology schools throughout the country.

Check out the rest of the Masters Of Barbering website to learn more about these men’s haircutting topics.

 

0 Comments

How To Cut Hair With Clippers – Clipper Blade Maintenance

The most important thing you can do for your clipper blades is to clean them with a blade wash solution. This will disinfect your clipper blades, lubricate them, as well as kill any germs.

At the end of the day after cutting hair, what you want to do is take the clipper, turn it on, and dip just the cutting surface in this blade wash solution for about 10 seconds. After 10 seconds, with the blade still running, lift the clipper out of the solution, turn the clipper on its side, and let all the hair drip out.

This will allow the blase to move back and forth much easier providing a better cut. It’s also going to extend the life of the cutting surface and the length of time in between sharpenings.

Check out the rest of the Masters Of Barbering website for more online clipper cutting education.

0 Comments

Barber School – How To Get The Most Out Of Barber School

In this blog I would like to talk about about how to be successful in barber or cosmetology school.

The topic of this blog is to pay close attention to those students that are giving the quality of hairucts that you would like to duplicate. What this is going to do is show your teachers, as well as your fellow classmates, that you’ve put ego aside and you’re humble enough to learn from one of your fellow students. You never knowwhat one tip, technique or trick that you’re going to pick up is going to help you tremendously and make you a lot of money throughout your career.

What it’s also going to show your teachers is that you take the barbering profession very seriously as well as your barbering education . They are  going to have no problem recommending you to people like myself or my colleagues when we come into your school to recruit.

Check out the rest of the Masters Of Barbering website for more information on how to be successful in barber school.

0 Comments

Barber Tools and Supplies – Proper Barber Comb and Brush Maintenance

Disinfecting your barber combs and brushes is a very important part of your job as a barber. If you do 20 haircuts in a day your barber combs are touching 20 different people. If you don’t clean them properly you will have 20 different hair clippings on them by the end of the day. There is nothing worse than a customer sitting in your barber chair and seeing dirty combs on the counter. As we have discussed in previous written and video barber blogs your customer is forming their opinion of you and the service they are about to receive before you cut one strand of hair.

In between every customer rinse all of your combs that you just used with warm water and soap. Rinse the soap completely off and immerse them in a germicide and disinfectant solution such as hydrocide or barbericide. Make sure whatever you use it kills all germs and diseases including HIV.

When you are going to use the barber comb or brush on the next customer make sure to rinse it off in warm water and dry the comb off. Do not take the comb out of the germicide/disinfectant solution and comb your customer’s hair. The barber comb or brush should be completely dry without any of the germicide/disinfectant left on it.

Check out the rest of the Masters Of Barbering website to learn more tips on how to take care of your barber tools.

0 Comments

Clipper Cutting – Learn How To Cut Hair With Clippers

This is the first in the Masters of Barbering Video Blog Series covering a wide variety of topics. This video follows up on a previous blog teaching the correct way to describe a clipper cut. It is much more professional to educate your clients on how they get their hairctu by the blade measurement and not a number. This will make your customer feel important and unique giving him one more reason to keep coming back!

0 Comments

Clipper Cutting: Clipper Maintenance

You are only as good as your tools so it is extremely important to have the best clippers available. As stated in previous blogs we recommend you have three clippers to complete your barbering kit: A detachable blade clipper, an adjustable clipper, and a trimmer. It is equally important to take care of your clippers. There is a four step process required to keep your clippers clean and in good working condition:

1. Use a clipper brush to gently brush of your clipper blades in between every use. This will keep off any wet hair which can cause the blade to rust. It will also avoid getting the previous clients hair on the next client. Lastly, removing the excess hair will keep the blade moving back and forth at maximum speed and efficiency.

2. Spray disinfectant on the clippers after brushing them off. Point the can away from you and spray the clipper blade while it is running. This will kill any germs or viruses and keep the blade clean.

3. Lubricate the blades. Use quality clipper oil and place a small amount of oil on the clipper blade wherever you see metal rubbing against metal. This will allow the blade to run smother and extend the life of the motor.

4. Blade wash your blades at the end of the work day. While the clipper is running dip just the blade in the solution for 10 seconds. Lift it out of the solution and let the loose hair drip out of the blades and dry them off. All of that loose hair keeps the blade from running at optimum speed. This will also kill any germs or viruses.

Maintaining your clippers like this on a daily basis will keep them in excellent working condition for a long time.

Please check out the rest of the Masters Of Barbering website for the best in online clipper cutting education.

0 Comments

Clipper Cutting: The Art Of The Taper – Part 2

In the barbering world the word taper is used often. It can mean many things and be very confusing. By definition a tapered haircut means shorter hair around the perimeter of the haircut gradually getting longer. Sometimes it makes more sense to think of it as longer hair tapered down to shorter hair. It is really that simple. That is all a taper or tapered means.

The best way to finish off a haircut is with a tapered neckline. A tapered neckline is a natural looking hairline. In other words instead of a line on the back of the neck it is faded out making it look more natural and professional.

I am not sure if it is because I have been thinking about this topic a lot but I have seen more squared off hairlines than ever. As mentioned previously the correct way to finish off a haircut is to taper the neckline. If a man absolutely wants a squared off hairline there is a correct way and wrong way to do it.

The correct way to square off a hairline is to go through the steps to taper it out and at the very end make a straight line with the trimmer. Make sure this line is a low as possible and the portion of the hair graduating from shorter to longer is still visible.

The wrong way to square off a hairline is to cut the sides and back to one length and then square it off without any graduation. Even worse is to cut this line higher than the natural hairline. This can ruin the best of haircuts.

With any man’s haircut a natural finish is best. It shows a different level of professionalism and education. There are a lot of licensed barbers and cosmetologists out there. This is a great way for you to differentiate yourself and increase your retention rate.

Please check out the rest of the Masters Of Barbering website to learn more clipper cutting techniques.

0 Comments

Clipper Cutting: Please Don’t Cut By Numbers – Part 4

Barbering or Men’s haircutting is a great business to be in and can be fun and rewarding. Being a barber can also give you a good steady income with job security. The barber business is a respected profession which should be taken seriously. We are all fortunate to be making our living this way in relaxed and relatively stress free atmosphere.

In previous blogs I wrote about why it is not a good idea to cut by numbers. In this blog I am going to give you real life examples on how to explain to the customer how they get their haircut. This will also be how they ask for their haircut next time they come into the barbershop or salon.

When talking with the customer of how high they like there fade there a couple of ways to go about it. You can ask them to point out where they like their fade; Low (just above the ear and below the occipital bone), medium (halfway to the temple area and the middle of the occipital bone), or high (to the temple area and above the occipital bone).

I personally like to measure the fade by the width of my fingers. Here are a few examples on how to explain or have your customer ask for their fade:

– 3 finger 3/8” taper
– 3 finger 3/8” taper with a 1finger 1/16” taper around the outline
– ½” Taper to the temples
– 2 finger ¼” Taper

These are just a few and you can come up with any combination. I will usually write this down on the back of a business card for the customer to carry with them so they know how to ask for their haircut. It makes the haircut sound much more detailed and is another reason for your customer to keep coming back to you.

Please visit http://www.mastersofbarbering.com for the very best in online clipper cutting education.

0 Comments

Clipper Cutting: Please Don’t Cut By Numbers – Part 3

Barbering or Men’s haircutting is a great business to be in and can be fun and rewarding. Being a barber can also give you a good steady income with job security. The barber business is a respected profession which should be taken seriously. We are all fortunate to be making our living this way in relaxed and relatively stress free atmosphere.

In previous blogs I wrote about why it is not a good idea to cut by numbers. In this blog I am going to give you the basic sizes of attachments and metal blades that will make it more professional and descriptive than clipper cutting by numbers.

The standard blade/attachment sizes from longest to shortest are:
– 1/2”
– 3/8”
– 1/4”
– 1/8”
– 1/16”
Anything size longer than ½” you are better off cutting with clipper over comb. Any size shorter is your adjustable clipper without an attachment, or a trimmer for the shortest. Those numbers are standard and they are: 1, 0A, 000, 0000, 00000.

When talking with the customer about how short they like to get their fade cut it is much more personalized and professional referring to the actual sizes than clipper cutting by numbers.

Stay tuned for the next blog in this series that will give real life examples to explain to customers how they get their haircut and how they should ask for it next time in the barbershop/hair salon.

Please visit http://www.mastersofbarbering.com for the very best in clipper cutting education.

0 Comments